COP-USA DVRH264-D1-8 - Manual (Page 18)

Digital Video Recorder User Manual
12
Item Name Function
1 Power Button Soft switch off to stop firmware running. Do it before power off.
2 INFOR Button Get information about the DVR like firmware version, HDD information
3 REC Button To record manually
4 Digital Button Input digital or choose camera
5 Multi Screen Button To choose multi screen display mode
6 SEARCH Button To enter search mode
7 MENU Button To enter menu
8 ENTER Button To confirm the choice or setup
9 Direction Button Move cursor in setup or pan/title PTZ
10 +/- Button To increase or decrease the value in setup
11 Playback Control Button To control playback, Fast forward/rewind/stop/single frame play
12 AUDIO Button To enable audio output in live mode
13 Auto Dwell Button To enter auto dwell mode
14 BACKUP Button To enter backup mode
15 PTZ Control Button
To control PTZ camera:
Move camera/ZOOM/FOCUS/IRIS/SPEED control
Tab 2.5 Definition of Remote Controller
2.5 Control with Mouse
2.5.1 Connect Mouse
It supports PS/2 or USB mouse through the ports on the rear panel, please refer to Fig 2.5 Remote Controller.
Notice: If mouse is not detected or doesn't work, check as below
Unplug/re-plug several times / Power off/on several times/ Change a mouse to try
2.5.2 Use Mouse
The structure of the main menu is shown in Fig 2.5 Remote Controller
In live:
Click left button on one camera to be full screen display. Click again to return to the previous screen display.
Click right button to show the control bar at the bottom of the screen as Fig 2.5 Remote Controller. Here are all control
and setup. Click right mouse again to hide the control bar.