Show time: display time in live, Language: setup the menu language, 2 time & date – COP-USA DVRHRT-16MD User Manual
Page 29
Digital Video Recorder User Manual
29
Step2: in this interface user can setup the device name, device ID, video format, max network users, VGA resolution and
language. The definitions for every parameters display as below:
Device name:
the name of the device. It may display on the client end or CMS that help user to recognize the device
remotely.
Video format:
two modes: PAL and NTSC. User can select the video format according to that of camera.
Password check:
enable this option, user needs to input user name and password can do corresponding operations with
the relevant right in system configuration.
Show time:
display time in live.
Show wizard:
tick off this item, there will display an opening wizard with time zone and time setup information
Max network uses:
set the max user amount of network connection
VGA resolution:
the resolution of live display interface, range from: VGA800*600、VGA1024*768、VGA1280*1024and
CVBS
Note： When switch between VGA and CVBS will change the menu output mode, please connect to relevant
monitor.
Language: setup the menu language.
Note: after changed the language and video output, the device needs to login again.
4.1.2 Time & date
Step1: enter into system configurationÆbasic configurationÆtime & date; refer to Fig 4-4: