COP-USA DVR2716XD-L - Manual (Page 22)

DVR User Manual
16
Fig 4-2 System Setup
4.1 Basic Configuration
Basic configuration includes three sub menus: system, date & time and DST.
4.1.1 System
Step1: Enter into MenuSetupBasicSystem. Refer to Fig 4-3:
Step2: In this tab you can setup the device name, device ID, video format, max network user,
VGA resolution and language. The definitions for every parameters display as below:
Device Name: The name of the device as it may display on the client end or on CMS, this
would help the user to recognize the device remotely.
Device ID: This ID is used to map the DVR with IR remote controller and speed dome
cameras. Fig 4-3 Basic Configuration-Basic
Video Format: Two modes: PAL and NTSC. User can select the video format according to the cameras being used.
Password Check: If enabled the user would need to input the user name and the password for performing corresponding operations.
Show System Time: If selected, displays the current time during live monitoring.
Max Online Users: To set the maximum number of concurrent user logins in the DVR.