COP-USA DVR2704XE-L - Manual (Page 42)

DVR User Manual
36
 Click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup button to see a
dialog box as Fig 4-39:
 Click Add icon to set the speed and time of preset point; select a preset point and then click Delete icon to delete that
preset point; click Modify icon to modify the setting of a preset point. User can click icons to adjust the position
of preset point. Click Preview button to preview the cruise line; click OK button to save the setting; click Exit button to exit current
interface.

Select a preset point in the cruise line list box. Click Delete button to delete that cruise line; click Clear all button to clear all cruise
line from the list box; click OK button to save the setting; click Exit button to exit current interface.
Step5: In the Advanced tab, while clicking track “Setting” button, a dialog box will pop-up as Fig 4-40:
Fig 4-39 Cruise Setting-Modify Cruise Line Fig 4-40 Track Setting
 User can control the dome by rotating up, down, right, left and can adjust the rotating speed and zoom, focus and iris of the dome;
click Start Record button and move the PTZ in the required manner to record by the DVR. Click this button again can stop recording.
Click Start track button to play recorded track. Click this button again can stop the playback.

Click icon to hide the tool bar and right click to view the toolbar again. Click icon to exit the current tab.
Step 6: After the completion of settings, click “Apply” button to save settings.