COP-USA DVR2704XE-L - Manual (Page 104)

4-CH DVR Quick Start Guide
2
1
Connect to keyboard
9
To connect external USB devices
like USB flash, USB HDD for backup
or update firmware; or connect to
USB mouse
2
Connect to high-definition
display device
10
VGA output, connect to monitor
3
CVBS video signal output
11
4-ch Audio inputs
4
Grounding
12
Audio output, connect to the sound
box
5
1-ch relay output. Connect to
external alarm.
13
4-ch video inputs
6 Alarm inputs. Connect to
external sensors 14
Power input
7
Network port
15
Turn on/off the power supply
8
Connect to keyboard
3. Startup & Shutdown
3.1 Startup
Step1: Connect to cameras and monitor.
Step2: Connect with the source power.
Step3: The device will boot and the power indicator will display blue.
Step4: A WIZZARD window will be pop-up.
3.2 Shutdown
You can shut down the device by using IR remote controller and mouse.
By IR remote controller:
Step1: Press Power button. This will bring up a shutdown window. The unit will
shut down by clicking “OK” button.
Step2: Disconnect the power.
By mouse:
Step1: Enter into
Menu and select “Shut Down” icon. This will take you
to a shutdown window.
Step2: Click OK. Then the unit will power off after a while.
Step3: Disconnect the power.
4. Setup Wizard
 After the device starts, a setup wizard pops up. You can set up time，
network , record and disk management.