COP-USA DVR2704XE-L - Manual (Page 23)

DVR User Manual
17
4.2 Live Configuration
Live configuration includes two submenus: live and main monitor.
4.2.1 Live
In this tab, user can setup camera name.
Step1: Enter into MenuSetupLiveLive tab Refer to Fig 4-6:
Note: A soft keyboard will pop up by clicking the camera name. User can self-define
the camera name.
Step2: Checkmark the Show Name when you set your camera name.
; click “default” button to restore default setting, click “OK” button to save the
setting.
Step4: Select “All” to setup all channels with the same parameters. Fig 4-6 Live ConfigurationLive
4.2.2 Main Monitor
Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 4-7:
Step2: Select split mode: 1Ч1, 2Ч2 and channel. Click button to setup the previous
channel group. Click button to set the latter channel group.
Step3: Set the dwell time.
Step4: Click “default” to restore default setting; click “apply” to save the setting; click
“exit” to exit current tab.
Fig 4-7 Live Configuration-Main Monitor
4.3 Record Configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap.