Compex mi-Sport - Manual (Page 107)

2. Connections
The electrical impulses generated by
the Compex are transmitted to the
nerves by self-adhesive electrodes. The choice
of the size, the connection and the correct
positioning of the electrodes are essential
factors for ensuring effective and comforta-
ble stimulation. So they require particular
care. To do all this – and for information
on the recommended stimulation positions
– refer to the pictures and pictograms in the
inside cover of the applications manual.
The specific applications also provide
useful relevant information.
1a Sockets for the four electrode cables
1b Socket for the battery charger
Connecting the electrodes
and cables
T he electrode cables are connected to
the stimulator through sockets on the
base of the device.
F our cables can be connected simul-
taneously to the four channels of the
device.
F or easier use and better identification
of the four channels, we advise you
to follow the colour of the electrode
cables and the stimulator sockets:
blue = channel 1 yellow = channel3
green = channel 2 red = channel 4
I n addition to the four classic
electrode cables, a fifth electrode
cable is supplied with your Compex.
This cable is equipped with the m—
4 system giving access to all the
m (muscle intelligence) functions of
your stimulator.
T he special cable of the m—4
system can be connected to any one
of the four sockets of the stimulation
channels located on the front of the
device and two electrodes are “clip-
ped” onto it in the same way as for a
classic cable.
Fig. 1 – Base of device
1a 1a
1b
1a 1a
107
E
n
g
li
s
h
B
A
F
C
D
1 1
2 2
3 3
4 4
E
G
H
Manuel MI-SPORT:MI-SPORT-ME 0909 10/09/09 19:20 Page 107