Checkline RTM 20D - Manual (Page 4)

The RTM 20 D is able to
contain up to 10 different
calibrations.
I.e. measurements can be
done on 10 different ropes,
“Rope No”, without being
forced to use conversion
tables. On the display you
get the right tension for
these ropes.
With the Rope-List,
attached to the instrument,
you can select the correct
“Rope No” (calibration).
In order to strongly
increase the accuracity of
the readings, each rope is
calibrated at four points.
These are: 0%, 30%, 60%
och 100% of "Cal Cap"
Max capacity range of RTM 20 D: 2, 5, 10 or 20 ton
2 Technical specification
RTM 20 D Max. Cap. (ton) 2.00 5.00 10.00 20.00
Resolution (guidance). Normally separatly
set for each “Rope No.”/ Cal.Cap.) (kg) 2 5 10 20
Rope dim. interval, approx. 6 – 13 (mm)
· ·
Rope dim. interval, approx. 9 – 19 (mm) · · ·
Rope dim. interval, approx. 13 – 27 (mm) · · ·
Rope dim. interval, approx. 18 – 38 (mm) · ·
Main dimensions RTM 20 D (mm) (LxWxH) 685x140x380
Weight RTM 20 D (kg) 6.2
Main dimensions Transp. Case (mm) (LxWxH) 760x170x400
3(12) RTM 20 D - Users Manual BA 7047be
ba7047be.vp - 040216
Type
RTM 20 D
S/N
XXXX
Date
98-12-15
Norm.Unit
ton (metric)
Alt.Unit
kN
Sel.rope
= PEAK+ON/OFF
Toggle
+ / -
Confirm
=
ENTER
/ZERO
Rope No Diameter - Type Area(mm
2
) Cal Cap (100%)
– 1 – 7.3 1 x 7 31,7 1.5 ton
– 2 – 9.2 1 x 7 51,7 3.0 ton
– 3 – 10.6 1 x 7 68,6 4.0 ton
– 4 – 13.1 1 x 7 102,0 5.0 ton
– 5– 15.4 1 x 7 143,6 5.0 ton
– 6 – 17.7 1 x 7 183,0 5.0 ton
– 7 –
– 8 –
– 9 –
Rope - List (example)
Max Cap = RTM’s Max. Capacity
Cal Cap = Max calibrated capacity for each rope