beautypg.com

Checkline RTM 20D User Manual

Page 11

background image

Accept by pressing the

ENTER

/ZERO- button (for about 2 seconds) until a colon : is lit up

on the left side of the display e.g.

. That is the indication of that the stored

"Rope No 3" has been opened.

You can cancel the selection and go back to previous rope by pressing ON/OFF.
The selected rope will remain in use even if the unit is turned off.

6:1:7 Automatic Turn OFF

Selection of turn off time. To save the battery the instrument will be automatically
turned off if no button is activated within a programmable time. The time can be set to
max 60 minutes and is done when you start up the RTM :

UNIT + ON/OFF

The display will first indicate

and thereafter

. XX is a number

between 1 and 60 (minutes).
Use the PEAK button to increase or the UNIT button to decrease until the preferred
number of minutes is displayed.
Accept by pressing the

ENTER

/ZERO- button (for about 2 seconds) until a colon : is lit up

on the left side of the display

. That is the indication that the time has been

stored in the permanent memory. The time will remain in use even if the unit is turned
off.
You can cancel the selection and go back to previous time by pressing ON/OFF

6:1:8 Serial Number and state of revision

If the

ENTER

/ZERO button is held while you start up the RTM is started, the

serial-number e.g.

will be displayed for about 1.5 seconds and thereafter the

state of revision

for about 2 seconds.

After that the RTM will go back to normal mode.

6:1:9 Overload

The instrument will indicate for two kinds of overload. In both cases the displayed value
will be flashing. The unit will indicate an overload by flashing the display reading in
about 1 Hz.
If the overload is due to that the "Cal Cap" of that "Rope No" has been exceeded , the
reading is on for 0.6 seconds and off for 0.4 seconds.
If the overload is due to that the "Max.Cap" (the loadcell) of RTM has been exceeded ,
the reading is on for 0.2 seconds and off for 0.8 seconds.

10(12)

RTM 20 D - Users Manual

BA 7047be

ba7047be.vp - 040216

: AoXX

SAo

AoXX

ENTER

ZERO

ON

OFF

2001

P1.1

: - 3 -

UNIT

ON

OFF