Checkline 3000FX Series - Manual (Page 2)

- 2 -
1 .0 I N T RODU CT I ON
Check•Line’s 3000FX Series gauges provide precise, non-destructive
digital coating thickness measurement on steel and non-ferrous
metals.
Three models are available:
DCF-3000FX: For testing non-magnetic coatings such as varnish,
paint, enamel, chrome, copper, zinc, etc., on steel and iron.
DCN-3000FX: For testing varnish, paint and anodizing on
non-ferrous metals and on austenitic stainless steels.
DCFN-3000FX: Combines the ferrous and non-ferrous testing
capabilities of the DCF-3000FX and DCN-3000FX.
3000FX Series gauges employ the same familiar menu technique that
is used in cellular telephones.
There are 4 main menu sections: Calibrations, Statistics, Limit
Values and Options. All gauge functions are accessed from one of
these main sections. The steps to necessary to reach and activate a
particular gauge function appear on the display in clear, easily under-
stood language—place probe on Cal foil, for example. A confirming
message appears on the display as each step is completed.
The Appendix provides a diagram of the menu structure.
It will be helpful to take a few minutes to study the Appendix while
practicing using the ▲, ▼, OK and ESC keys to move through the
menus selections. The 3000FS Series gauges are very easy to use.
A few minutes spent familiarizing yourself with using the keys to
move through the menus is all the training required.
- 27 -
W ARRAN T Y
ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original pur-
chaser that this product is of merchantable quality and confirms in kind and quality with the
descriptions and specifications thereof. Product failure or malfunction arising out of any
defect in workmanship or material in the product existing at the time of delivery thereof
which manifests itself within one year from the sale of such product, shall be remedied by
repair or replacement of such product, at ELECTROMATIC’s option, except where unautho-
rized repair, disassembly, tampering, abuse or misapplication has taken place, as determined
by ELECTROMATIC. All returns for warranty or non-warranty repairs and/or replacement
must be authorized by ELECTROMATIC, in advance, with all repacking and shipping
expenses to the address below to be borne by the purchaser.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE WARRANTY
OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE OR
APPLICATION. ELECTROMATIC SHALL NOT BE RESPONSIBLE NOR LIABLE FOR
ANY CONSEQUENTIAL DAMAGE, OF ANY KIND OR NATURE, RESULTING FROM
THE USE OF SUPPLIED EQUIPMENT, WHETHER SUCH DAMAGE OCCURS OR IS
DISCOVERED BEFORE, UPON OR AFTER REPLACEMENT OR REPAIR, AND
WHETHER OR NOT SUCH DAMAGE IS CAUSED BY MANUFACTURER’S OR
SUPPLIER’S NEGLIGENCE WITHIN ONE YEAR FROM INVOICE DATE.
Some State jurisdictions or States do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. The duration of any
implied warranty, including, without limitation, fitness for any particular purpose and mer-
chantability with respect to this product, is limited to the duration of the foregoing warranty.
Some states do not allow limitations on how long an implied warranty lasts but, not with-
standing, this warranty, in the absence of such limitations, shall extend for one year from the
date of invoice.
ELECTROMATIC Equipment Co., Inc.
600 Oakland Ave. Cedarhurst, NY 11516—USA
Tel: 1-800-645-4330/ Tel: 516-295-4300/ Fax: 516-295-4399
Every precaution has been taken in the preparation of this manual. Electromatic Equipment
Co., Inc., assumes no responsibility for errors or omissions. Neither is any liability assumed
for damages resulting from the use of information contained herein. Any brand or product
names mentioned herein are used for identification purposes only, and are trademarks or reg-
istered trademarks of their respective holders.
- 2 -
1 .0 I N T RODU CT I ON
Check•Line’s 3000FX Series gauges provide precise, non-destructive
digital coating thickness measurement on steel and non-ferrous
metals.
Three models are available:
DCF-3000FX: For testing non-magnetic coatings such as varnish,
paint, enamel, chrome, copper, zinc, etc., on steel and iron.
DCN-3000FX: For testing varnish, paint and anodizing on
non-ferrous metals and on austenitic stainless steels.
DCFN-3000FX: Combines the ferrous and non-ferrous testing
capabilities of the DCF-3000FX and DCN-3000FX.
3000FX Series gauges employ the same familiar menu technique that
is used in cellular telephones.
There are 4 main menu sections: Calibrations, Statistics, Limit
Values and Options. All gauge functions are accessed from one of
these main sections. The steps to necessary to reach and activate a
particular gauge function appear on the display in clear, easily under-
stood language—place probe on Cal foil, for example. A confirming
message appears on the display as each step is completed.
The Appendix provides a diagram of the menu structure.
It will be helpful to take a few minutes to study the Appendix while
practicing using the ▲, ▼, OK and ESC keys to move through the
menus selections. The 3000FS Series gauges are very easy to use.
A few minutes spent familiarizing yourself with using the keys to
move through the menus is all the training required.
- 27 -
W ARRAN T Y
ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original pur-
chaser that this product is of merchantable quality and confirms in kind and quality with the
descriptions and specifications thereof. Product failure or malfunction arising out of any
defect in workmanship or material in the product existing at the time of delivery thereof
which manifests itself within one year from the sale of such product, shall be remedied by
repair or replacement of such product, at ELECTROMATIC’s option, except where unautho-
rized repair, disassembly, tampering, abuse or misapplication has taken place, as determined
by ELECTROMATIC. All returns for warranty or non-warranty repairs and/or replacement
must be authorized by ELECTROMATIC, in advance, with all repacking and shipping
expenses to the address below to be borne by the purchaser.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE WARRANTY
OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE OR
APPLICATION. ELECTROMATIC SHALL NOT BE RESPONSIBLE NOR LIABLE FOR
ANY CONSEQUENTIAL DAMAGE, OF ANY KIND OR NATURE, RESULTING FROM
THE USE OF SUPPLIED EQUIPMENT, WHETHER SUCH DAMAGE OCCURS OR IS
DISCOVERED BEFORE, UPON OR AFTER REPLACEMENT OR REPAIR, AND
WHETHER OR NOT SUCH DAMAGE IS CAUSED BY MANUFACTURER’S OR
SUPPLIER’S NEGLIGENCE WITHIN ONE YEAR FROM INVOICE DATE.
Some State jurisdictions or States do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. The duration of any
implied warranty, including, without limitation, fitness for any particular purpose and mer-
chantability with respect to this product, is limited to the duration of the foregoing warranty.
Some states do not allow limitations on how long an implied warranty lasts but, not with-
standing, this warranty, in the absence of such limitations, shall extend for one year from the
date of invoice.
ELECTROMATIC Equipment Co., Inc.
600 Oakland Ave. Cedarhurst, NY 11516—USA
Tel: 1-800-645-4330/ Tel: 516-295-4300/ Fax: 516-295-4399
Every precaution has been taken in the preparation of this manual. Electromatic Equipment
Co., Inc., assumes no responsibility for errors or omissions. Neither is any liability assumed
for damages resulting from the use of information contained herein. Any brand or product
names mentioned herein are used for identification purposes only, and are trademarks or reg-
istered trademarks of their respective holders.