Checkline 3000FX Series User Manual
Page 11
- 18 -
To continue measuring, press
ESC
repeatedly until the start
screen with the four dashes - - - - is displayed.
To print statistical values:
1. Press ▼ repeatedly until Statistics appears n display.
2. Press
OK
. Printout Of Statistics appears.
3. Point instrument with the IR transmitter (top end face)
towards the IR adapter installed on the printer. The distance
should be approx. 12” to 20” (
30cm
to
50cm
).
4. Press
OK
. The data are transmitted, and Printing... will
briefly appear, followed by the start screen with the four
dashes - - - -.
To continue measuring, press
ESC
repeatedly until the start
screen with the four dashes - - - - is displayed again.
6.4 Deletion of statistical values and of single values
1. Press ▼ repeatedly until Statistics appears on display.
2. Press
OK
. Printout Of Statistics appears
3. Press ▼ repeatedly until Deletion Of Statistics appears
4. Press
OK
. The statistical values with the single values are
deleted. Statistics deleted will briefly appear on the display,
then the start screen with the four dashes - - - - .
Quick deletion of statistics and stored readings
1. Press
ESC
repeatedly until the start screen with the four
dashes - - - - is again displayed.
2. Press
ESC
until Deleted Statistic? appears on the display.
3. Press
ESC
again. Statistics Deleted will briefly appear,
then the start screen with the four dashes - - - -.
- 11 -
Using Rechargeable batteries
When using rechargeable batteries, the battery symbol always
flashes, because rechargeable batteries provide a lower voltage
than non-rechargeable batteries. To eliminate this situation:
1. Press
▼ repeatedly until Options appears on the display.
2. Press
OK
.
3. Press
▼ until
Power Supply
appears on the display.
4. Press
OK
.
5. Press
▼ until
Rechargeable Batteries
appears on the
display.
6. Press
OK
.
Supply with Rechargeable Batt appears briefly on the screen,
followed by - - - . The procedure is complete.
- 18 -
To continue measuring, press
ESC
repeatedly until the start
screen with the four dashes - - - - is displayed.
To print statistical values:
1. Press ▼ repeatedly until Statistics appears n display.
2. Press
OK
. Printout Of Statistics appears.
3. Point instrument with the IR transmitter (top end face)
towards the IR adapter installed on the printer. The distance
should be approx. 12” to 20” (
30cm
to
50cm
).
4. Press
OK
. The data are transmitted, and Printing... will
briefly appear, followed by the start screen with the four
dashes - - - -.
To continue measuring, press
ESC
repeatedly until the start
screen with the four dashes - - - - is displayed again.
6.4 Deletion of statistical values and of single values
1. Press ▼ repeatedly until Statistics appears on display.
2. Press
OK
. Printout Of Statistics appears
3. Press ▼ repeatedly until Deletion Of Statistics appears
4. Press
OK
. The statistical values with the single values are
deleted. Statistics deleted will briefly appear on the display,
then the start screen with the four dashes - - - - .
Quick deletion of statistics and stored readings
1. Press
ESC
repeatedly until the start screen with the four
dashes - - - - is again displayed.
2. Press
ESC
until Deleted Statistic? appears on the display.
3. Press
ESC
again. Statistics Deleted will briefly appear,
then the start screen with the four dashes - - - -.
- 11 -
Using Rechargeable batteries
When using rechargeable batteries, the battery symbol always
flashes, because rechargeable batteries provide a lower voltage
than non-rechargeable batteries. To eliminate this situation:
1. Press
▼ repeatedly until Options appears on the display.
2. Press
OK
.
3. Press
▼ until
Power Supply
appears on the display.
4. Press
OK
.
5. Press
▼ until
Rechargeable Batteries
appears on the
display.
6. Press
OK
.
Supply with Rechargeable Batt appears briefly on the screen,
followed by - - - . The procedure is complete.