Checkline MTM - Manual (Page 8)

AWS-MTM-DP Guide
PROGRAMMING 7
M ENU T REE
Operation Overview: There are 7 buttons on the display face: Off, On/clr, ENT and four (4)
programmable or ‘soft’ buttons. The exact function of the soft buttons is defined by the
bottom two rows of text and will vary depending on the current mode of operation. Pressing
the ENT button will take you back to the previous screen, until you return to the run mode.
Button Operation:
Run Mode (Current mode displayed):
ON / clr: Clears the peak reading if saved, zeros the display and erases the memory location
otherwise.
ENT: Save current reading in memory if on and clears the peak reading.
Memory Mode (MEM displayed instead of mode):
ON / clr: Goes to run mode without erasing memory location.
ENT: Scrolls to next empty location.
Either Mode:
RUN -> MEM: (soft button) changes the mode of the arrow buttons.
Up and Down: (soft buttons) Units and mode respectively for RUN; Memory location for
MEM. Depends on the right programmable button.
MENU SCROLL
BUTTONS
MENU
LOCATION
RETURNS TO
PREVIOUS MENU
MENU ACTION
BUTTONS