Checkline MTM - Manual (Page 10)

AWS-MTM-DP Guide
PROGRAMMING 9
2-2-3 Scroll Lockout
+, -: Toggle on or off.
2-3 Contrast
+, -: Change the contrast of the display.
2-4 Information
SYS: Gives detailed info about the system.
TD: Gives detailed info about the transducer.
3 DATA MENU
SEL: Enters menu.
3-1 Print Memory
Send: Prints the currently saved readings.
3-2 Clear Memory
CLR: Followed by ENT clears the readings saved in memory.
3-3 Reset All
CLR: Followed by ENT clears all readings and all sets. Should be used
approximately every 5000 readings.
Special Note
: MTMDP-2S PTEST is a modified version of the MTMDP series and does
not utilize a data menu. Readings are output through the RS-232 when either ENT is
pressed after measuring a peak torque, or when Auto Clear clears a peak. Summary
information, such as Min, Max and Mean are neither stored in memory or downloaded.