Checkline FGV-XY - Manual (Page 11)

– 11 –
4.5 Response Time (f05)
The gauges response time function smooths out the gauge’s sampling and
adjusts the sampling period accordingly. Response times are 3, 20 and 150
msec.
Press UNIT to change the setting. Press PEAK to save and move to the
next Function Mode. Press ZERO to save and finish.
4.6 External Output (f06)
This function allows the user to change between Overload and Comparator
type output. Press UNIT to change the setting.
Press UNIT to change the setting. Press PEAK to save and move to the
next Function Mode. Press ZERO to save and return to the standard
measuring mode.
– 26 –
10.0 C LEARING THE M EMORY
10.1 Clearing The Last Record
1. The last recorded memory block may be erased by pressing ZERO while
viewing the last data point.
2. If ZERO is pressed while viewing any other data point, the display will
show “Err” and will not delete anything.
ZERO ZEROZERO
10.2 Clearing All Memory
1. When viewing the last memory point, press and hold ZERO.
2. The display will show “nonE”.
3. All memory has been cleared and the gauge returns to
standard measuring mode
ZERO ZEROZERO
10.3 No Recorded Data
1. The display will show “nonE” is switching to memory mode when there
are no recorded memory points.