BUCHI NIRWare - Manual (Page 212)

206

NIRWare Suite NIRWare 1.5 Software Manual
In case "Batch report" is defined in the application, select a corresponding measurement sequence with
prediction results and open it by clicking on the "Open existing DataSet" button or with double click
on the corresponding row indicator .
The batch report preview window opens.
To verify the result of this batch click on the"Next" button in the Life Cycle bar. The following window
appears:
For electronic signature on a batch report, select the corresponding reason, enter User, Password and an
optional Comment to verify the measurement sequence.
NOTE
Using electronic signature on detail reports the corresponding measurement sequence can be deleted
unless the second electronic signature is applied. Only an approved measurement sequence can not be
deleted anymore.
Using electronic signature on batch, the corresponding measurement sequences can not be deleted
anymore, once the batch has been closed.
Delete or Disable Measurement Sequences
Deleting Measurement sequences without prediction results
Measurement sequences without prediction result (sequence type filter setting 0 in selection table) can
be deleted permanently if the corresponding samples are not used in any calibrations.
Information about this can be found by selecting a single or group of measurement sequences in the
bottom window: