BUCHI NIRWare - Manual (Page 125)

NIRWare 1.5 Software Manual Tutorial

119

Now the reference cap is removed and the probe window is brought in good contact with
the sample. The user now clicks the green check mark or the button on the probe to
initiate the scan. During the scan, the progress bar will be moving on the bottom of the
screen.

Once the measurement is complete, the result report will appear on the right side of the
screen. Two report formats are available (but only one will be presented to the user).

If the "Detail" report is activated in the application "Report" adjustment:

If the "Batch Overview" is activated in the application "Report" adjustment and the
"Number of Container" is also activated: