BUCHI Ultrasonic Package - Manual (Page 37)

BÜCHI Labortechnik AG Taking out of operation | 9
Ultrasonic Controller 37/46
9 Taking out of operation
9.1 Transport
Preliminary tasks
1. Prepare the original packaging.
2. Clean the Ultrasonic Generator.
• Make sure the device is free of any liquids and residues.
Tasks
1. Disassemble the device in reverse order.
• 5.3 Damper, installation [ } page 26]
• 5.2 Ultrasonic controller with nozzle, installation [ } page 25]
2. Put all relevant documentation e.g. operation manual into the packaging.
9.2 Taking out of operation
1. Remove all liquids and residues.
• For device disposal in an environmentally friendly manner, make sure
that the components are separated and recycled correctly by a specialist
for disposal.
• For disposal of liquids and consumables such as catalyst or acid, see the
data sheets of these chemicals.
2. Follow the valid regional and local laws concerning a disposal. For help,
please contact the local authorities.