BUCHI Ultrasonic Package - Manual (Page 28)

5 | Installation BÜCHI Labortechnik AG
28/46 Ultrasonic Controller
5.7 Accessories, installation
5.7.1 Inert Loop Adapter, installation
1. Install the 2 hose clamps (3) on the cut inlet heater hose (2).
• 004237 Hose clamp 30­45 DIN3017
2. Install the hose connector (4) on the inert gas adapter (1).
• 048637 Hose connector 6­1/8"
• 11060798 Inert gas adapter
1. Connect the inert gas hose (1) from the nozzle outlet to the hose connec­
tor (2).
• 11058850 FEP hose Ø4.0/6.0 l=1500 mm