BUCHI Ultrasonic Package - Manual (Page 13)

BÜCHI Labortechnik AG Safety | 2
Ultrasonic Controller 13/46
WARNING
Risk of contact or incorporation of harmful substances during op­
eration.
Serious poisoning or death.
1. Before operation, check the device for correct assembly.
2. Before operation, inspect seals and tubes for good working order.
3. Exchange worn out or defective parts immediately.
4. Exchange clogged filters immediately.
5. Only operate the device in ventilated environments.
6. Directly withdraw released gases and gaseous substances by sufficient
ventilation.
7. Perform a dry­run without sample material and check for gas leakages.
CAUTION
Risk of inhalation of ozone.
Minor poisoning.
1. Directly withdraw released gases and gaseous substances by sufficient
ventilation.
CAUTION
Risk of contact with hot parts.
Minor or moderate burnings.
1. Do not touch hot parts.
2. Let the system cool down for several minutes after use.
NOTICE
Risk of spilled liquids or mechanical shocks.
Liquids leaking into the housing or mechanical shocks can damage the device.
1. Do not spill liquids over the device or its component parts.
2. Wipe off any liquids instantly.
3. Place the sample vessel onto the designated reservoir­plate on top of the
device.
4. Ensure a safe positioning of the sample vessel.
5. Do not move the device when it is loaded with liquid.
6. Keep external vibrations away from the device.