Brookfield R/S CPS Rheometer - Manual (Page 39)

Brookfield Engineering Labs., Inc. Page 39 Manual No. M08-218-B0212
Before deleting, ensure that the data has been archived to a printer or PC. Before the
memory is cleared, the following prompt is displayed:
Clear Memory?
-NO
-YES
If “YES” is selected, the results will be cleared from the memory; if “NO” is selected, no
deletions are made and the user is returned to the menu.
VI.6.7 Utilities →Measure Temperature
This function displays the temperature with the temperature sensor connected to the rhe-
ometer.
After initiating this function, the temperature is measured continuously:
Temperature:
20.5°C
=return
Push the OK key to return to the Utilities menu.
VI.7 Menu Entries of the Configuration Menu
The configuration menu allows the user to set parameters on the rheometer.
The entries:
• Set Output-mode: Defines if data is output to a printer or to the serial interface
during measurement.
• Set Meascount mode: Defines whether the measurement counter MEASCOUNT is
reset daily or not.
• Set Meascount=0: Resets the MEASCOUNT counter to 0.
• Set Time/date: Inputs date and time.
• RS232 Parameters: Sets data transfer parameters of the serial interface RS232.
• Language: Selects language for user prompts.
• Service: For service personnel only
• Service2: For service personnel only
These functions are explained in more detail in the following sections.