Compaq V6500 - Manual (Page 82)

Audio board
Description Spare part number
For use only in computer models with Intel processors:
● In models that include consumer infrared 449453-001
● In models that do not include consumer infrared lens 431443-001
For use only in computer models with AMD processors:
● In full-featured models equipped with consumer infrared 454176-001
● In defeatured models equipped with consumer infrared 449967-001
Before removing the audio board, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4 . Remove the battery (see Battery on page 41 ).
5 . Remove the following components:
a . Hard drive (see Hard drive on page 42 )
b . Optical drive (see Optical drive on page 50 )
c . Switch cover (see Switch cover on page 52 )
d . Keyboard (see Keyboard on page 54 )
e . Display assembly (see Display assembly on page 58 )
f . Top cover (see Top cover on page 64 ).
Remove the audio board:
1 . Remove the two Phillips PM2.5×4.0 screws (1) that secure the audio board to the computer.
2 . Release the audio board (2) by sliding it back to disengage the audio connectors from the base
enclosure.
74 Chapter 4 Removal and replacement procedures