Switch cover – Compaq V6500 User Manual
Page 60
Switch cover
Description
Spare part number
Switch cover for use in full-featured computer models (includes LED board and cable)
431425-001 and
451010-001
Switch cover for use in defeatured computer models (includes LED board and cable)
455260-001
Before removing the switch cover, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
).
Remove the switch cover:
1
.
Remove the two Phillips PM2.5×10.0 screws (1) and the Phillips PM2.5×4.0 screw (2) that secure
the switch cover to the computer.
2
.
Turn the computer display-side up, with the front toward you.
3
.
Open the computer as far as possible.
52 Chapter 4 Removal and replacement procedures