Compaq V6500 - Manual (Page 52)

Computer feet
Description Spare part number
Rubber Kit (includes base enclosure rubber feet and display bezel screw covers) 431431-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations
illustrated below.
Memory module
Description Spare part number
2048-MB (PC2-5300, 667-MHz, 1-DIMM) 453774-001 and
457437–001
1024-MB (PC2-5300, 667-MHz, 1-DIMM) 446495-001
512-MB (PC2-5300, 667-MHz, 1-DIMM) 446494-001
Before removing the memory module, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4 . Remove the battery (see Battery on page 41 ).
Remove the memory module:
1 . Loosen the three Phillips PM2.0×5.0 screws (1) that secure the memory/WLAN module compartment
cover to the computer.
44 Chapter 4 Removal and replacement procedures