Compaq V6500 - Manual (Page 50)

Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket.
Description Spare part number
250-GB, 5400-rpm 453775-001
200-GB, 4200-rpm 451863-001
160-GB, 5400-rpm 451862-001
120-GB, 5400-rpm 446498-001
80-GB, 5400-rpm 446497-001
60-GB, 5400-rpm 446496-001
Before removing the hard drive, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4 . Remove the battery (see Battery on page 41 ).
Remove the hard drive:
1 . Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer.
2 . Lift the right side of the hard drive cover (2), swing it to left, and remove the cover.
3 . Remove the hard drive cover.
NOTE: The hard drive cover is included in the Plastics Kit, spare part number 438669-001.
42 Chapter 4 Removal and replacement procedures