Compaq V6500 - Manual (Page 70)

16 . Remove the display hinges (2). The display hinges are available using spare part number
433288-001.
17 . If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips
PM2.0×3.0 screw (1) that secures each transceiver to the display enclosure.
18 . Release the retention tabs (2) built into the display enclosure that secure the wireless antenna cables
and remove the cables from the tabs.
19 . Detach the wireless antenna transceivers (3) from the display enclosure. The wireless antenna
transceivers and cables are available using spare part numbers 449728-001 (for use only with
computer models equipped with an 802.11a/b/g/n WLAN module) and 449726-001 (for use only
with computer models equipped with an 802.11a/b/g or 802.11b/g WLAN module).
20 . Remove the wireless antenna transceivers and cables.
21 . If it is necessary to replace the microphones and cables, release the retention tabs (1) built into the
display enclosure that secure the microphone cables to the display enclosure.
22 . Remove the microphone receivers (2) from the clips in the display enclosure.
62 Chapter 4 Removal and replacement procedures