Compaq V6500 - Manual (Page 78)

USB/power connector board
Description Spare part number
USB/power connector board (includes USB/power connector board cable) 447444-001
Before removing the USB/power connector board, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4 . Remove the battery (see Battery on page 41 ).
5 . Remove the following components:
a . Hard drive (see Hard drive on page 42 )
b . Optical drive (see Optical drive on page 50 )
c . Switch cover (see Switch cover on page 52 )
d . Keyboard (see Keyboard on page 54 )
e . Display assembly (see Display assembly on page 58 )
f . Top cover (see Top cover on page 64 ).
Remove the USB/power connector board:
1 . Remove the two Phillips PM2.5×5.0 screws (1) that secure the USB/power connector board to the
computer.
2 . Release the USB/power connector board (2) as far as the USB/power connector board cable allows.
70 Chapter 4 Removal and replacement procedures