Compaq V6500 - Manual (Page 66)

Display assembly
Description Spare part number
15.4-inch, WXGA, BrightView display assembly (includes microphones) 446485-001
Before removing the display assembly, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4 . Remove the battery (see Battery on page 41 ).
5 . Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 47 ).
6 . Remove the following components:
a . Switch cover (see Switch cover on page 52 )
b . Keyboard (see Keyboard on page 54 )
Remove the display assembly:
1 . Disconnect the display panel cable (1) from the system board.
2 . Disconnect the microphone cable (2) from the power button board.
3 . Remove the wireless antenna cables (3) from the clips in the top cover.
CAUTION: Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer components.
4 . Remove the four Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
58 Chapter 4 Removal and replacement procedures