ALFA NETWORK AIP-W525H - Manual (Page 38)

AIP-W525H
- 33 -
 Beacon Interval - Enter a value between 20-1000 milliseconds for the Beacon Interval. The
beacons are the packets sent by the Router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
4.6.3 Security
Choose menu
“Wireless → Security”, you can configure the security settings of your wireless
network.
There are four wireless security modes supported by the Router: WEP (Wired Equivalent Privacy),
WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA-Mixed (Pre-Shared Key
or Enterprise).
Figure 4-18 Wireless Security
 Disable - If you do not want to use wireless security, check this radio button. It ’s strongly
recommended to choose one of the following modes to enable security.
 WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as shown in Figure 4-19.
Figure 4-19