ALFA NETWORK AIP-W525H - Manual (Page 19)

AIP-W525H
- 14 -
7. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-11.
Figure 3-11 Quick Setup – Wireless
 Band: Keep the default setting: 2.4GHz (B+G+N). If you just want to use a specific
protocol, please use the drop down menu to select it.
 Mode: This field determines the wireless mode which the AIP-W525H works on.
 Network Type: Keep the default setting: Infrastructure. If you just want to use another
operation mode, please use the drop down menu to select it.
 SSID: Create a unique and easy way to remember the name of your wireless network.
You can also keep default settings without the device being affected.
 Channel Width - Select any channel width from the pull-down list. The default setting is
automatic therefore it can adjust the channel width for your clients automatically.
 Channel Number- This field determines which operating frequency will be used. The
default channel is set to Auto allowing the AIP-W525H to choose the best channel
automatically. It is not necessary to change the wireless channel unless you notice
interference problems with another nearby access point.