Adaptive Technologies PM-BAND-20S - Manual (Page 2)

© 2008 Allen Products Company, Signal Hill, CA 90755 USA (562) 424-1100 021408
Figure 3:
Figure 4:
Figure 5:
Figure 6:
Step 6
Position the location of the PM-MOUNT-6DOWN on the pole and then tighten
screw using screw or wrench to desired tension and complete the banding
operation (Figure 6).
Step 7
Repeat steps 1 to 6 for the lower banding strap assembly (Figure 6).
Step 8 Recommendation
Always use a safety cable from the speaker to a structurally safe anchor point
(Refer to PM-SAFETY-6DOWN for Safety Cable Anchor Point System).
Note: Optional
To strengthen banding strap use two straps on each slot of the PM-
MOUNT-6DOWN