Canon REALiS SX60 User Manual
Page 52
52
PROJECTIN
G AN IMAGE
FROM TH
E COMPUT
ER
Setting Up the Computer Screen Automatically (AUTO PC)
This projector automatically makes optimum settings for the total number of dots and track-
ing depending on a signal type (SXGA+, XGA, etc.).
The auto PC adjustment function does not need to be performed if the projector is project-
ing an image properly with [AUTO SETUP].
You can use this function if the input signal is [ANALOG PC-1] or [ANALOG PC-2].
1
Press the [AUTO PC] button.
The auto PC adjustment function is activated and the projected image is optimized.
z For some computers, the auto PC adjustment function does not optimize the projected
image. If such is the case, you need to make settings (total dots, tracking, horizontal/verti-
cal positions, horizontal/vertical pixels, etc.) for the input signal (P91-93).
z The previous signal type ([ANALOG PC-1] or [ANALOG PC-2]) is recorded. If you connect
the projector to the same computer, you can project the image with the same settings as
before simply by selecting the input signal.