Canon REALiS SX60 - Manual (Page 65)

65
PRO
JE
CTIN
G AN IMAGE
FROM A
V
EQU
IPME
NT
Connecting to AUDIO IN Terminals (SX7/X700)
Connect an audio cable to the AUDIO IN terminal corresponding to the input image signal
if you want to use the projector’s speaker.
z The speaker outputs the audio signal corresponding to the selected image signal.
z Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
z Connect the audio cable between the AUDIO OUT terminal and an external audio-visual
equipment if you want to output the audio signal to the audio-visual equipment (P66).
z The built-in speaker is monaural.
Audio cable
AV equipment
Projector
Commercial audio cable
AUDIO OUT terminal
(RCA terminal) (Stereo mini jack)
(Stereo mini jack) (RCA/Stereo
mini jack)
Audio input terminal
(AUDIO IN)
for DEGITAL IN/ANALOG IN-1
SX7/X700
for ANALOG IN-2
for VIDEO IN/S-VIDEO IN
You can input an audio signal
corresponding to 3 image
input systems.
Connect to the AUDIO IN ter-
minal corresponding to the
type of the input image signal.