Av equipment – Canon REALiS SX60 User Manual
Page 3
3
AV Equipment
1.
Install the projector.
P30-31
z
Install the projector at the desired distance from the screen.
z
Install batteries in the remote control (P27)
2.
Connect the projector.
P62-66
z
Connect the projector and the AV equipment with a cable* (see P36, 37 for the
instruction on connecting a audio cable).
3.
Turn on the projector.
P38-39
z
Connect the power cord and turn on the projector.
z
Adjust the height of the projecting image (P41).
z
Select a display language when turning on the projector for the first time (P39).
4.
Press the
button.
P44
z
Adjust the focus of the screen.
5.
Set up the AV equipment.
z
Turn on the AV equipment and play the video image.
6.
Select the input signal by pressing the
button.
P68-70
z
Select DIGITAL VIDEO as the input signal for a digital video image.*
For the other video image, go to step 7.
7.
Press the
button again.
P68
z
Adjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
8.
Select the image mode with the
button.
P53-54
z
Select an appropriate image mode for projection.
z
Specify the aspect ratio or display area in the [Aspect] menu as required (P71,
88, 89).
Turn off the projector
P58-59
z
Turn off the projector and unplug the power cord.
*
Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video
image (P63).
Finishing the projection...