Canon REALiS SX60 - Manual (Page 112)

112
SE
TTING
UP FU
NCTIO
NS FROM MEN
US
Setting up the Digital Video Input Signal
[Digital video]
You can select the standard of the digital video
input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Setting a Password
[Password settings]
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Other settings
Digital video
Projects a full range digital signal.
Projects a limited range digital sig-
nal.
z Refer to the User's Manual that came
with the AV equipment for more
detailed information on settings.
DIGITAL VIDEO
F
L
System settings
Other settings
Password settings
Disables the password protection.
Enable the password protection.
z Once you set a password, the pass-
word entry screen appears at power-
on. Enter a 4-digit password with [ ],
[ ], [<], and [>]. If the password is
valid, projection starts. If you enter a
wrong password three times, the pro-
jector will be turned off.
z To cancel the password, remove the
power plug from the AC outlet after
the projection, and then insert the
power plug while holding down the
[MENU] button until the projector
beeps.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
Off
On
<
<