Panasonic KXF150 - Manual (Page 41)

HELP Function
—If you have lost your procedures—
The HELP button is used to print information about how to send documents, how to set up your
unit and how to store phone numbers.
Using the HELP button
Press the HELP button when the unit is in the idle status.
The following is printed out.
<>
FOLLOU INITIfiL 5ET UP PROCEDURES BELOU.
1.INSERT DOCUMENT FACE DOUN.
2. PRESS "SP-PHONE". CLIGHTS!)
3. DIAL FAX NUMBER OF PARTY YOU DISH TO SEND TO.
4. UAIT FOR FAX TONE THEN PRESS "START".CSP-PHONE LIGHT GOES OFF)
<>
1. PRESS "PROGRAM".
2. PRESS "B" THEN THE NUMBER OF THE FEATURE YOU UISH TO SET USING
THE DIAL KEY-PAD, CSEE LIST OF FEATURES BELOU)
3. ENTER CHOICE OR DATA.
4.IF YOU ENTERED B99 PRESS "START", OTHERUISE PRESS "SET" TO STORE
YOIR SELECTION.
5. PRESS "PROGRAM" TO END SET UP.
= Jan. 01 1992 12:00AM U01 SET DATE
B02 YOUR LOGO CI.E. COMPANY OR
INDIUIDUAL NAME) = Panasonic TAD/FAX
П03 YOUR TELEPHONE NUMBER
tt04 PRINT__IEANSMTqfiTnN PFPQBT = ERROR
I1=0N
3GRAM”
Г. PRESS DIRECT CALL STATION OR PRESS "AUTO"'
4, ENTER PHONE NUMBER USING THE DIAL KEY-PAD.
5. PRESS "SET" TO STORE PHONE NUMBER.
TO STORE IN SUCCESION, REPEAT STEPS 3 TO 5.
S.PRESS "PROGRAM" TO END SET UP.
<
1. PRESS "PROGRAM".
2. RRESS "tt" THEN "2" "7".
3. PRESS "START".
<
CTO SEND A FAX)
1.INSERT DOCUMENT FACE DOUN.
2.PRESS ANY STATION OR PRESS "AUTO DIAL" AND 2-DIGIT NUMEERC00 TO 27).
CTO MAKE A PHONE CALL)
1. LIFT HANDSET OR PRESS "SP-PHONE".
2. PRESS ANY STATION OR PRESS "AUTO DIAL" AND 2-DIGIT NUMBERC0O TO 27).
<
l.OPEN "ANSUIERING CONTROL" PANEL.
2. PRESS "REC".
3. SPEAK INTO THE MICROPHONE. CUP TO 16 SEC)
4. UIHEN FINISHED, PRESS "STOP" OR "REC" AGAIN.
<
CONFIRM THAT THE ANS/FAX INDICATOR IS LIT.
<
PRESS "NEU MESSAGES".
<
PRESS "ALL MESSAGES".
1-33