Panasonic KXF150 - Manual (Page 25)

Setting Up Your Facsimile Unit
System setup features
The unit has 9 Basic Features, as listed below, and 19 Advanced Features, as listed on page 1-18.
Basic Features are the settings that need to be programmed upon finishing the installation. Most
probable choices have been preselected for you, but some features, such as SET DATE, YOUR
LOGO and YOUR TELEPHONE NUMBER, must be programmed by the user.
Advanced Features should be temporarily programmed as the need arises.
BASIC FEATURE LIST
The bold'face indicates factory default settings.
Code Functions Descriptions Selections Pages
#01 SET DATE Sets the current date
and time (not stored) 1-20
1-21
#02 YOUR LOGO Sets your company
name or personal
name up to 30 digits 1-22
1-23
#03 YOUR TELEPHONE
NUMBER Sets your facsimile
telephone number
up to 20 digits 1-24
#04 PRINT
TRANSMISSION
REPORT
Individual
transmission report
setting
ON/ERROR/OFF 1-26
1-27
#05 ANS/FAX RING
COUNT Selects the number of
rings to answer in the
ANS/FAX mode, or
sets RINGER to off TOLL SAVER
or 1 to 4 rings
or RINGER OFF
1-28
1-29
#06 FAX RING COUNT Selects the number of
rings to answer in the
FAX mode 1 to 4 rings 1-30
#07 RECORDING TIME
FOR TAD
Selects the recording
time for incoming
message
VOX (unlimited)
or
1MIN (1 minute)
1-31
#08 REMOTE TAD ID Sets the remote
control code for
remote TAD operation
3 digits
(111)
1-32
#99 PRINT ADVANCED
FEATURE LIST Prints the advanced
feature list
5-8
1-17