Panasonic Panafax UF-121 - Manual (Page 65)

Cleaning the Head Roller and Document Scanning Guide
The head roller in your machine wilt gradually accumulate dust in the course of regular
use. You should therefore clean the roller using the following procedure.
1. Open the Receiving Unit by pulling the
latch button forward on the right side panel,
and swing the Receiving Unit forward. Re­
move the recording paper.
4. Wipe the Document Scanning Guide with
a soft and clean cloth.
5. Relock the Document Scanning Guide into
place by gently pressing backward until it
clicks. Reset the recording paper correctly
(see page 62), then gently close the
Receiving Unit with both hands. Tear the
recording paper projecting from the unit.
Receiving Unit
2. Unlock the Document Scanning Guide by
gently pressing inward on the two tabs
located at the right and left ends of the unit
and swing the Document Scanning Guide
forward.
3. Wipe the Head Roller gently with a soft,
clean cloth soaked with ethyl alcohol, while
rotating the roller slowly towards the back
of the machine with your fingers.
Latch Button
Document
Scanning
Guide
8