Panasonic Panafax UF-121 - Manual (Page 60)

PROBLEM SOLVtNO Am /
CARE_____________ ____________
Information Codes
When something unusual occurs, the display may show one of the information codes
below. These will help you fix the problem.
Information
code
Meaning Action
010 No recording paper. Reload recording paper
(see page 62).
020 Thermal Recording Head
temperature is too high. Open the Receiving Unit for
a few minutes to permit
cooling.
030 Document misfeeding. 1. Reload the document
properly.
2. Remove document jam.
3. Adjust ADF (see page 67).
031 Document paper is too long
or jammed.
Document length exceeds
1 meter.
Remove document jam
(see page 64).
060 Door is opened. Close the Receiving Unit.
400 During initial handshake,
receiving station did not
respond or communication
error occurred. 1. Check with the other
party.
2. Reload the document
and try again.
402
404
405 During initial handshake,
communication failure
occurred. Reload the document and try
again.
403 No polling capability at the
other side.
Ask other side to set
“POLLED « ON”.
407 No confirmation from the
receiving station for the
previous page sent. Wait a few minutes and send
again.
408
409 Other side confirmation of
previous page is illegible.
Walt a few minutes and
transmit again.
411
414 Polling password does not
match. Check polling password.
60