Panasonic OMNIVISION PVQ-1310 - Manual (Page 28)

Special VCR Features (continued)
Weak Signal Display ON/OFF
When “ON" is selected, picture is displayed even when
broadcast signal is weak or nonexistent.
1
ACTION
o
Display MAIN MENU.
Press ACTION.
2
MAIN MENU
SELECT ;A ▼ ► KEY
SET l ACTION key
Display SET UP CH
screen.
1) Press AT^ ►
to select “CH.”
2) Press ACTION
to display.
3
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
WEAK SIGNAL DISPLAY:OFF
SELECT;* » KEY
SET :► KEY
END ;ACTION KEY
Select WEAK SIGNAL
DISPLAY.
1) Press
AT
to
select.
2) Press ► to
set “ON” or
“OFF.”
• “ON" = Picture is displayed regardiess of signai condition, and
may not aiways be clearly visible.
“OFF” = Screen turns solid blue when signal is absent or weak.
• If unit is connected to equipment which has blue back feature,
selecting “ON" will have no effect on the other equipment.
umMi-m rCH
Cp-OfiO
nm B
-
1 ^
'
0\-0'0
t1 tnzD mmCH cHtx#
[0)0 0 0
Mu$E eowm qd g ?
o
SLOW
V W
► SELECT/SET
CH UP
CH DOWN
VOL UP
VOL DOWN
3
t
►
<
n 1
2
4
ACTION
4
ACTION
O
Return to the normal
screen.
Press ACTION twice.
Model PVQ-2510 unit is shown here.
VCR Lock
All operations are prohibited except Timer recording and tape
eject. Useful for families with small children.
VCR LOCK ACTIVATED
REC
o
To turn “ON.”
In stop mode, hold
down REC on the
unit without a
cassette inserted for
7 seconds.
To turn “OFF.”
Repeat above with
or without cassette.
VCR Lock is canceled automatically
after about 24 hours if clock is set.
28
For assistance, call 1-800-211-PANA(7262)