Tv timer features, Display program screen, Select on-timer – Panasonic OMNIVISION PVQ-1310 User Manual
Page 16: Set the on-timer time, Check list before you begin, Set alarm, Tv timer features -17, Займи, On-timer with alarm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Timer Features
ON-TIMER with Alarm
This unit can be set to automatically power on in one of 2 modes (TV,
Playback.) You can also combine the On-Timer with a one minute alarm
that gradually increases in volume.
1
PROG
o
Display PROGRAM
screen.
Press PROG.
2
SET PROORAM
TIMER PROGRAMMING
SELECT
SET
END
A ▼ KEY
► KEY
PROG KEY
3
\|/ОГ<(Г/1МЕР
займи
а
1
аг
41\
зг
/1''
SELECT HOUR
SELECT
SET
END
A T
KEY
► KEY
PROG KEY
Select ON-TIMER.
1) Press
Af
to select.
2) Press ► to
display.
Set the ON-TIMER TIME.
1) Press
Af
to
select.
2) Press ►
to set.
• Make sure a tape is
inserted if Playback
mode is selected.
l^c
Check list before you begin.
Q The clock is set to correct time.
Model PVQ-2510 unit is shown here.
4
ON TIMER
6:00AM CH08
ALARM:ON
SELECT ALARM
ABC
CANCEL
SELECT
END
ADD/DLT
A
▼ KEY
► KEY
PROG KEY
KEY
Set Alarm.
Press AT to
select “ON” or
“OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one minute or until
canceled by pressing any button (including VOL -f- -.)
To Make Corrections,
use
AT
and ◄ ► to move back and correct as necessary.
Set ON TIMER.
Press PROG.
• “ON TIMER SET is displayed.
• ON TIMER indicator lights on the unit.
To cancel ON-TIMER set,
Repeat steps 1 and 2. Then, press ADD/DLT to clear the time in step 3.
Now, press PROG to end. “ON TIMER END” appears on-screen for a
few seconds.
2
select
/
set
CH UP
CH DOWN
VOL UP
VOL DOWN
PROG
ADD/DLT
16
If no button on the remote or unit (including
a button used to turn off the alarm) is
pressed within 60 minutes after unit turns
itself on, it will turn itself back off.
For assistance, caii 1-800-211-PANA(7262)