Panasonic RX-E300 - Manual (Page 19)

Listening to Tapes
Normal, chrome and metal tapes can be used.
2 iCa] 4И
ro
о о о о
О О О о
о о о о
о о о о
о о о о
ООО
о ф_о_о
О О О О
О О О О
О О
REV MODE
О
Press □ STOP.
STOP'
Т D О С
МО L
é. EJECT
Press ié: EJECT.
Load the tape and close the
lid.
When the lid is closed, the tape travel
direction is automatically set to play the
side facing you.
Tape counter
playback is to
commence facing you.
t nnr ППП
' / 0 i_ UUU —
^ _________
Tape travel direction indicator
PLAYfflift
Press <1 > PLAY/DIR.
Playback now starts.
While is displayed, the toward side is
played back.
W h i l e i s displayed, the reverse side is
played back.
T П П Г П П П
till L- UUU I
Lights.
Type of tape which can be played on this unit:
Normal/TYPE I О
CrO/TYPE II 0
Metai/TYPE IV 0
STOP'
PlAY/DII
REW FF
да
RESET
To stop play:
Press □ STOP.
To listen to the other side of
the tape:
Press <11> PLAY/DIR during playback.
To rewind or fast forward the
tape:
Press REW or FF.
To reset the tape counter to
“000J’:
Press COUNTER RESET.
Selecting the Dolby noise reduction function
DOLB^^^
Press DOLBY NR.
TheDQNR indicator lights.
To release the Dolby NR function:
Press DOLBY NR again to turn off the OD nr indicator.
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
“DOLBY" and the double-D symbol 00 are trademarks of
Dolby Laboratories Licensing Corporation.
Selecting the reverse mode
(Available only from the remote control)
REV MODE Press REV MODE to select the
mode.
C —)
The tape plays from the toward side to the reverse side, and
it then stops automatically.
The tape plays repeatedly until the n STOP is pressed.
(In the recording mode, the sound is recorded from the for­
ward side to the reverse side and it then stops automatically.)
Only one side of the tape is played, and then the tape stops
automatically.
19