Connection – Panasonic WV-CP214 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cautions:
1, Connect this to a 12V DC class 2 power supply
only.
2. To prevent lire or shock hazard, the UL listed
wire VW-1, style 1007 should be used for the
cable for DC 12V Input Terminal,
(16) AC 24V In Terminal (AC 24V IN)
This terminal accepts 24V AC power source
(19.5V - 28V). Be sure to connect grounding lead
to the GND terminal.
Cautions:
1. Connect this to a 24V AC class 2 power supply
only.
2, To prevent fire or shock hazard, the UL listed
wire VW-1, style 1007 should be used for the
cable for AC 24V Input Terminal.
CONNECTION
A. WV-CP210
1, Connect the AC Power Cord (6) to a electrical out
let of 120V AC 60 Hz.
B. WV-CP212
1. A power supply of 12V DC is required.
2, Connect the power cable to the DC 12V |n
Terminal (15) on the rear panel of the camera.
12 VDC
(10.5V- 16 V)
Resistance of copper wire [at 68°F (20°C)]
Copper wire
size (AWG)
#24
(0.22mm>)
#22
(0.33mm")
#20
(0.52mm")
#18
(0.83mm")
Resistance
ohms/ft
0.257
0.165
0.099
' 0.059
Resistance
ohms/m
0.078
0.050
0.030
0,018
- 7 -