Specifications – Panasonic WV-CP214 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
Pick-up Device:
Scanning Area:
Synchronization:
Scanning System:
Scanning:
Horizontal:
Vertical;
Horizontal Resolution;
Video Output:
Signal-to-Noise Ratio:
Electronic Light Control;
1/15,700 sec.
Minimum Illumination;
Gain Control:
White Balance:
Detail:
Lens Mount:
Ambient Operating Temperature;
Ambient Operating Humidity:
Po\A/er Source;
512 (H)
X
492 (V) pixels, Interline Transfer CCD
4,8 (H) X 3.6 (V) mm (Equivalent to scanning area of 1/3" pick-up tube)
Internal, Line-locked or Multiplexed Vertical Drive (VD2) Selectable
2 : 1 interlace
525 lines / 60 fields / 30 frames
15,734 KHz
59,94 Hz
330 tines
1,0 Vp-p composite 75 ohms / BNC connector
46 dB (AGC OFF, weight ON)
Equivalent to continuous variable shutter speed between 1/60 sec, and
0.06 footcandle (0.6 lux) at F0.75 [Equivalent to 0.2 footcandle (2 lux)
at FI.4]
Selectable AGC ON (-t-12 dB) or OFF
Selectable ATW ON or OFF (AWC)
Selectable SHARP or SOFT
CS-mount
14°F- 122"F(-10°C--
h
50“C)
Less than 90%
WV-CP210: 120V AC 60 Hz
WV-CP212: 12V DC
WV-CP214: 24V AC 60 Hz
- 1 8 -