Panasonic WV-CP214 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Calculation method of maximum cable length
between camera and power supply,
10.5V DC <
V
a
-
(R X 0.42 x L) < 16V DC
L : Cable length (meter)
R : Resistance of copper wire (ohms/meter)
V
a
: DC output voltage of power supply unit
L standard =
L minimum =
L maximum =
V
a
-
12
0.42
X
R
V
a
- 16
0.42
X
R
V
a
- 10.5
0.42 X R
(meter)
(meter)
(meter)
Caution;
To prevent fire or shock hazard, the UL list
ed wire VW-1, style 1007 should be used for
the cable for DC 12V Input Terminal.
C. WV-CP214
1. A power supply of 24V AC 60Hz is required.
2. Connect the power cable to the AC 24V In
Terminal (16) on the rear panel of the camera.
24 VAC, 60 Hz
(19.5 V-28 V)
Recommended wire gauge sizes for 24V AC line.
Copper wire
size (AWG)
#24
(0,22mm')
#22
{0.33mmi)
#20
(0,52mm=)
#18
(0.83mm>)
Length
of Cable
(Approx.)
(ft)
314
495
842
1403
(m)
95
150
255
425
Caution:
To prevent fire or shock hazard, the UL list
ed wire VW-1, style 1007 should be used for
the cable for AC 24V Input Terminal.
- 8 -