Panasonic WV-CP214 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Mounting the Lens
When you use the lens other than listed on pages 10,
11, 12, 13 and 14, lens nnount should be C-mount or
CS-mount and lens weight should be less than 0.99
lbs. (450g). If not, both the lens and camera should
be secured.
The protrusion of the rear of the lens should be as
shown below.
C-mount: Less than 7/16' (11.5 mm)
CS-mount: Less than 1/4' (7.2 mm)
Note:
To use the C-mount lens, the Lens Mount
Converter
(C-mount
adaptor)
WV-AD20
should be used with the camera.
Caution:
Always set the Flange-back adjusting ring to fully
cockwise by loosing screws on the ring before
mounting the lens, otherwise the inner glass and
CCD image sensor could be damaged by the
lens.
(1) Mount the lens by turning it clockwise onto the
lens mount of the camera,
(2) Connect the lens cable to the Auto Iris Lens
Connector (1) on the camera when an auto iris
lens is used.
Screw
- 1 5 -