Front view of deck, Bold: vcr function, Play – Panasonic PV-D4734S User Manual
Page 9: Stop/eject, If the disc cannot be removed, Audio/video, Input connector 2 (line 2) p. 35, Channel a/t, Tracking/v-lock pp. 4, 21, Reset all memory functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Front View of DECK
Bold:
VCR Function
Italic.
DVD Function
Bold Italic. VCR and DVD Functions
Normal:
Others
PLAY--------------------------------------
p. 20
STOP/EJECT-
p. 20
If the disc cannot be removed...
First, unplug DECK. Then, prepare a rigid
wire (e.g. an extended paper clip) and,
applying moderate force, insert it straight
into the hole at the base of the tray.
The tray will eject a little. Now, pull the tray
all the way out and remove the disc.
3
Over 2 inches
POWER
Cassette
Compartment
Audio/Video-----------
Input Connector 2
(LINE 2)
p.
35
REC
p. 21
CHANNEL A/T
Multi Function
Display
p. 11
TRACKING/V-LOCK
pp. 4, 21
Remote
Sensor
Reset All Memory Functions
—
OPEN/CLOSE
p. 22
------ FAST FORWARD
/ SEARCH/
SKIP»t
p. 20,
23
REWIND/SEARCH/
SKIPH^
p. 20,
23
----------------------
PLAY
p. 22
----------------------
STOP
p. 22
Returns to factory setting. Use if relocating DECK, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the DECK.
1
2
Turn DECK Power on.
Press and hold both
VCR PLAY
and
CHANNEL
A
on the DECK for
more than 5 seconds.
• The power shuts off.
Perform “Initial Setup (Ready to Play)”
on page 16.