Iviuiti-brand control feature, Multi-brand control setup, Confirm code entry – Panasonic PV-D4734S User Manual
Page 28: Using multi-brand control, Multi-brand control feature ,29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
iviuiti-Brand control Feature
Multi-Brand Control Setup
The Remote Control can be set to control some TVs.
1
Find your TV Brand Code Number on the
following page.
Set up for TV control,
hold down TV button,
enter code with NUMBER keys.
Confirm code entry,
>- press POWER
to turn selected unit on or off.
• See table below for controllable functions in each mode.
' Repeat setup after remote battery replacement.
' Remote will not control every TV made by the
manutacturer listed. If you get no response, your
particular unit cannot be controlled.
There are NO additional codes for the products
listed. If your product is not listed, then the
remote is not compatible with that product.
Using Multi-Brand Control
After remote is set up, you can select VCR, DVD, or TV
for the desired function.
Press VCR, DVD, or TV
on the remote.
(Table below shows available remote buttons for each mode.'
'^.Unit
Mode\^
DVD/VCR
TV
DVD
VCR
All
VOL +/-
TV
EJECT/OPEN/CLOSE*,
DISPLAY, PLAY, STOP,
FF/SLOW+, REW/SLOW-,
VCR/TV, PAUSE/Sr/LL, SKIP,
AUDIO,
CM/ZERO, SPEED, REC,
TAPE POSITION, PAGE,
COUNTER RESET
POWER,
INPUT,
NUMBER
keys,
ENTER, CH A/T, VOL +/-
Bold: VCR Function
Italic: DVD Function
Bold Italic: VCR and DVD Functions
Normal: TV
Not all functions listed may be controllable.
In TV mode, it may be necessary to press ENTER after pressing NUMBER keys
for channel selection.
28