Before doing initial setup, Turn tv on, Deck ^ tv – Panasonic PV-D4734S User Manual
Page 16: Initial setup (ready to play), Press vcr on remote for vcr mode, Plug vcr power plug into an ac wall outlet
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

initial betup tor Basic connections (Heady to Play)
Before doing Initial Setup
1
Turn TV on.
S
gg
connGctions 0 RF Coaxial CabiG ConnGction and 0 AV CabiG ConnGction on page 12.
Set
TV
to
channel 3.
Set
TV
to
VIDEO.
[DECK ^ TV]
• Go to “Initial Setup (Ready to Play).” (See below.)
[Cable Box ^ DECK ^ TV], [DSS DECK TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone.
• If you use a DSS Receiver, it must be turned off.
Initial Setup (Ready to Play)
1
Press VCR on remote for VCR mode.
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel
and clock set starts.
• It screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4.
• To change VCR’s output channel, please see “VCR's Output Channel” on page 19.
Plug VCR Power plug into an AC wall outlet.
-CH AUTO SET PROCEEDING-
^
/ I
CANCEL:STOP
AUTO CLOCK SET
^ PROCEEDING^
CANCEL:STOP
Function buttons are void during Initial Setup.
To eject a tape during Auto Set, press EJECT on remote
or STOP/EJECT twice on DECK.
Then make settings manually. (See p. 18.)
If Auto Clock Set takes more than 30 minutes,
press STOP and perform settings manually. (See p. 18.)
Continued on next page...
16