C ni:;l|utisimg oervice – Panasonic PV-D4734S User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

c ni:;L|utisimg oervice
Check the following points if you are having trouble with your DECK.
1 Power
Solution
No power...
• Completely insert Power Plug into an AC outlet.
• Press POWER button on.
• Make sure power source is active.
Power turns Itself off...
• Auto power-oft (shutoff) occurs after about 5 min.
in DVD mode with no operation, or if there is no
broadcast signal in TV or Playback mode.
Turn the power back on. (pp. 23, 33)
1
necoramg &
t'layoacK
Solution
TV program cannot be recorded...
• Check connections between DECK,
external
antenna, and TV.
• Check channel selections.
• Make sure your antenna system (CABLE or TV) is
correctly set. (Channels [p. 18])
• Make sure cassette record tab Is intact, (p. 6)
Timer recording cannot be
performed...
• Confirm that clock is set to
current time and date.
• Make sure Cable/DSS box (if used) is left on and
tuned to channel to be recorded.
• Set recording start/stop times correctly, (p. 24)
• Timer recording may not be performed or continued
if a power interruption occurs before or during a
Timer Recording, even after power is restored.
There is no playback picture, or the
playback picture is noisy or contains
streaks...
• Select channel 3 or 4 on TV to match VCR output
channel (3 or 4) (p. 16) or select LINE.
• Set VCR/TV selector to “VCR.”
• Adjust TRACKING control In either direction, (p. 4)
• Try Head Cleaning, (p. 4)
During speciai effects playback
picture may contain some vertical
jitter when using a TV with an
Automatic Vertical Hold Control...
• Set TV’s Vertical Hold Control to MANUAL, then
adjust.
DECK cannot be controlled...
• Make sure DECK power is on.
• Check Remote batteries.
- Make sure VCR LOCK is set to off. (p. 32)
• Make sure Remote is in proper mode. (p. 28)
• Make sure Timer Recording is not in progress.
nemoie ooniroi
Solution 1
DECK cannot be remote controlled...
• Make sure DECK power is on.
• Make sure Remote is in VCR mode.
• Aim Remote Control directly at remote sensor on DECK, (p.
9
)
• Avoid any object blocking signal path.
• Check Remote batteries, (p. 4)
• Exposing DECK remote sensor to direct fluorescent
or outdoor light may cause signal interference.
PROG buttons do not respond...
—
• PROG functions are not available in COMPONENT
Video Output and S-VIDEO OUT. Set TV to either RF
IN or VIDEO IN. (p. 10)
• Check Remote batteries, (p. 4)
• Press VCR or DVD button for DVD/VCR mode. (p. 28)
58
For assistance^ please call;
1
"800-211 -PANAi7262) or, conJaci us via the web at-http:/Avww,panasonfc.com/contactinfo