Panasonic KX-TCM943-B - Manual (Page 58)

^ Before Requesting Help
General
Problem Remedy
The unit does not work. •Check the settings (p. 10-13).
•Charge the battery fully {p. 11).
•Clean the charge contacts and charge
again (p. 11).
• Install the battery properly (p. 53).
• Place the handset on the base unit
and unplug the AC adaptor to reset.
Plug in, then try again.
• Re-insert the handset battery within
5 minutes to avoid memory loss and
place the handset on the base unit.
Then try again.
You cannot program items
such as the time/day
adjustment (p. 17). • Programming is not available while the
unit is in the talk, speakerphone, hold
or intercom mode.
• Move closer to the base unit.
The RECHARGE indicator
flashes or the unit beeps
intermittently.
•Charge the battery fully (p. 11).
You charged the battery fully,
but the RECHARGE indicator
flashes.
•Clean the charge contacts and charge
again (p. 11).
• Install a new battery (p. 53).
The IN USE/CHARGE
indicator light never goes out
while charging.
•This is normal.
If you cannot solve your
problem.
•Call our customer call center at
1-800-211-PANA{7262).
/
58